TP-Link is the most popular router brand nationwide, with its routers sitting in more than a third of every house and office across the country. Yet it’s coming under considerable pressure as the US ban on foreign-made routers continues to take hold and push networking manufacturers to move operations stateside.
Some major router manufacturers, like Netgear, Asus, and Nokia, have already received exemptions from the ban. But at this point, TP-Link hasn’t, and that means once your router hits the firmware and software cut-off point on January 1, 2029, it’ll receive no new features or security updates, potentially leaving you exposed.
Your TP-Link router isn’t banned
It’s floating in regulatory limbo
Starting with what hasn’t changed, and that’s the status of your current TP-Link router: it’s all good. Your TP-Link router isn’t going to stop working randomly overnight (at least, not because of this), and it’ll continue receiving updates up until the current cut-off point of January 1, 2029 — so, a way off.
The US government’s ruling focuses on new routers, rather than ones in circulation. Since March 23, 2026, any new routers built and manufactured outside the US require a special exemption from the Pentagon or Homeland Security before they can receive FCC approval. However, “foreign-produced” is broad, as TP-Link is finding out to its detriment.
The ruling is broad enough that almost any major stage of router production counts, including design, development, manufacturing, and assembly; it’s also not just focused on China, and applies to any foreign country. Given most routers are manufactured outside the US, it affects almost every company you can think of.
By extension, it also means that a US-made router may not be completely covered by the domestic manufacturing focus if it still contains enough components developed abroad, which is where certain router manufacturers are coming unstuck.
Several major router manufacturers are already looking to the future on the FCC exemptions list, including Asus, Adtran, Amazon (and Eero), Nokia, Netgear, and SpaceX among others. But at the time of writing, TP-Link is on the outside looking in, and that means two things for its routers.
Firmware updates are on a clock, and no new TP-Link router sales
But it won’t all happen at once
The router manufacturing ban has a few different implications. For starters, TP-Link can’t get approval for its new Wi-Fi 8 routers because it hasn’t received its FCC exemption. While other manufacturers are prepping to launch Wi-Fi 8 routers in early 2027, TP-Link is still waiting to find out if it will even be allowed.
The router manufacturing ban doesn’t affect existing routers, though. Anything already approved by the FCC is still good to go and will remain on sale, so you can buy routers from TP-Link and any of the other manufacturers mentioned.
That leads to the next part of the issues facing TP-Link routers. Because it hasn’t received an exemption, its existing routers will cease receiving firmware updates on January 1, 2029. That’s because the FCC effectively treats the covered routers as still off-limits for modifications, which it also strangely considers security patches.
Now, the FCC already issued a waiver for that, which was due to end on March 1, 2027, but has already been extended through to January 1st date. With most other major brands already receiving an exemption for both existing and future routers, it leaves TP-Link’s hardware firmly in the firing line.
January 1, 2029 is a few years away
With all of this said, you don’t need to immediately ditch your TP-Link router. The FCC has already moved the exemption date a couple of years into the future, so what’s to say they won’t move it again?
There is also the very real prospect of TP-Link securing an exemption. The company moved its headquarters from China to California in 2024, and is steadily moving more of its manufacturing to the US, which should strengthen its claim. Nothing is set in stone just yet, and the 2029 date is when the current permission will lapse rather than a hard deadline the FCC will suddenly crack down on.
That said, multiple states have launched lawsuits against TP-Link regarding its routers and its dependency on Chinese-made parts, meaning it’s a shifting landscape that will come under more scrutiny.
Check your TP-Link router support date
I would advise checking your router against TP-Link’s support pages to see when your router might start becoming a liability, mind. There is nothing wrong with being prepared for the worst, were it to happen.
The easiest way is to cross-reference your router model and firmware. Your model and build should be printed on the sticker attached to the underside of the router. Take that information and run an internet search along the lines of “[TP-Link router + model number end of life]” and you should find the information you’re looking for.
An AI search could also be handy here using similar terminology, though make sure to cross-reference any information given to you by an AI search in case it’s hallucinating.
TP-Link’s End of Life Products could also help you find your specific router model.
If your router’s end-of-support date lands in the next couple of years, or your router hasn’t had a firmware update for a couple of years, it could well be time to start planning for a replacement.