The Ubuntu 26.04 LTS release on April 23, 2026, dropped the graphical driver tool from its default installation. This meant that for something as basic as a graphics driver, you needed the terminal or had to browse forum threads.
Ubuntu 26.10, released on October 15, 2026, fixed this. It includes a dedicated page in the App Center. I find it simpler, but if you own an NVIDIA card, you must check one detail before clicking install.
A front door for drivers
App Center’s Add-ons tab replaces the terminal-and-forum scramble
Launch App Center and navigate to the Add-ons tab. For hardware that qualifies, there’ll be an Additional Drivers page. It displays the graphics driver options for your specific card, and it also covers other hardware that may require proprietary software.
This page may be missing from your install, but that doesn’t mean anything is broken. Currently, it shows up on selected hardware, and what it offers varies depending on the software sources you have enabled.
This is significant because the old Software & Updates tool that Ubuntu 26.04 LTS removed was how many people enabled proprietary drivers. Without it, I had to run ubuntu-drivers devices to see Ubuntu’s recommendations, then sudo ubuntu-drivers install to apply them.
This new page isn’t smarter than the terminal options that I resorted to. It runs on the same logic as the old graphical Additional Drivers app. What we now have is simply a window around it.
It’s nice and easy to use, but it isn’t a speed improvement. I never found the two old commands limiting, but this page has an edge. It shows you what versions are available along with their details before you commit.
Old card, one right pick
Decoding 580, 615 and “open” without a computer science degree
NVIDIA drivers are named by numbers, and the two that you must pay attention to on Ubuntu 26.10 are 580 and 615. Don’t mistake these numbers for a quality score. Each number represents a separate branch, supporting a range of cards. NVIDIA says 580 is the last branch that supports GTX 750, GTX 900-series, or GTX 10-series cards, and the 615 branch can’t drive these cards.
There’s another label worth decoding called “open.” The driver’s kernel component for NVIDIA is shipped in two options. The one that’s open has publicly available source code, while the other, the proprietary option is closed-source.
You need the proprietary option on older cards, and the open option only works with Turing and newer GPUs. On Ubuntu 26.10, you get 580 in both options, but only the open one for 615.
|
Your card family |
Examples |
Driver path on 26.10 |
|---|---|---|
|
Maxwell, Pascal, Volta |
GTX 750, GTX 900 series, GTX 10-series, Titan V |
580, proprietary modules (the only option for these cards) |
|
Turing and newer |
GTX 16-series, RTX 20 and newer |
580 (open or proprietary) or 615 (open only) |
It’s easy to find your family. Open Settings, navigate to About, then read the Graphics entry. The name you see here may trip you up. GTX 1060 is Pascal and GTX 1650 is Turing, even though the 16 might make it seem related to the 10-series..
This page should usually offer only what fits, since it bases its choices on your hardware. Still, I’d recommend reading the version number before confirming anything.
If you’re upgrading, be mindful of this. Even if you don’t manually select a new NVIDIA driver, it can change during the upgrade, because Ubuntu 26.10 uses transitional packages to migrate installations from the 595 and 610 driver branches to 615.
Install, restart, check
The Secure Boot prompt, and a one-line check that it worked
After selecting and applying your new driver, App Center will require your password before installing it. Reboot your computer after this process so that the new driver can take over.
You might get nervous because of Secure Boot. It allows only signed code to load when the computer starts, including driver components. This feature is turned on by default on most modern PCs. But it shouldn’t be a problem because Canonical signs Ubuntu’s prebuilt NVIDIA modules so Secure Boot lets them load.
It’s different for locally built drivers (DKMS). They aren’t signed by Canonical, and you should get a blue MOK management screen at the next boot. If this happens, select Enroll MOK, then type in the password that you set while installing. If you skip this step, the driver won’t load at startup.
Once you are logged back in, run this command in your terminal:
nvidia-smi
If you get a small table with your GPU’s name and a driver version matching the branch you picked, the install worked. If the module didn’t load, you should see a message saying it can’t talk to the driver. Common causes of the second outcome include a missed restart or an unenrolled Secure Boot key.
Support dates, the smaller App Center changes, and the verdict on “finally”
Ubuntu 26.10 is an interim release that will get updates until July 2027. The Drivers page is a feature of this release, and I wouldn’t assume it’s reaching 26.04 LTS through a regular system update.
This release also changed the way App Center displays software. There’s now a single app details view shared by Snap and Debian packages. It puts the publisher, ratings, permissions, version and size next to the install or uninstall button. It’s not as flashy as the drivers page, but seeing where a package comes from before clicking is an advantage.
You may not see the same options on the page that I did. The terminal option still has an advantage because Ubuntu recommends DKMS drivers when you’re running a custom kernel without a matching prebuilt NVIDIA module.
What’s important is that for most desktops, a job that formerly required the terminal now works in a graphical window. The window lays out the options better than a terminal list does. So yes, it’s finally easier.