17 - Nov - 2026

This $39 touchscreen packs a powerful new ESP32 chip with Wi-Fi 6, Zigbee, and Thread

If you’re into DIY tech projects, Espressif’s newly released ESP32-S31 platform has definitely been on your radar. Now, VIEWE has launched a $38.99 touchscreen development board built around it that packs plenty of features into one compact unit.

According to the company’s official product page, the UES31S043H800V480C-U combines a 4.3-inch capacitive display with Wi-Fi 6, Bluetooth 5.4, and an IEEE 802.15.4 radio capable of supporting Zigbee and Thread. The board uses the ESP32-S31-WROOM-3-N16R16V module, which contains the ESP32-S31NRV16 system-on-chip.

An ESP32-and-touchscreen combo you can’t miss

One that’s significantly more affordable than Raspberry Pi 5

VIEWE Touchscreen ESP32 Credit: VIEWE

In our closer look at the new ESP32-S31, we explored how this generation adds several notable features beyond faster processing, including wireless hardware that supports 2.4GHz Wi-Fi 6 at up to 150Mbps, Bluetooth 5.4 LE, Bluetooth Classic, and IEEE 802.15.4 for Zigbee and Thread.

Thanks to global RAM shortages, the spike in Raspberry Pi 5 prices has pushed the boards beyond what many of us would comfortably spend. That sub-$40 price looks even more convincing when you consider VIEWE’s feature-rich development board.

VIEWE’s board comes with an IPS panel featuring an 800 x 480 resolution, 400-nit brightness, and a GT911 capacitive touch controller. Moreover, you get a USB-C port for power, programming, and debugging, alongside a separate USB-A port with USB 2.0 High-Speed OTG. You can find a list of the specifications and features in the table below:

Feature

Specification

Processor

ESP32-S31NRV16 dual-core RISC-V SoC, up to 320MHz

Wireless module

ESP32-S31-WROOM-3-N16R16V

Memory

16MB flash and 16MB PSRAM

Display

4.3-inch IPS, 800×480 resolution, 400-nit brightness

Touch input

GT911 capacitive touchscreen

Wi-Fi

2.4GHz Wi-Fi 6, up to 150Mbps

Other wireless

Bluetooth 5.4 LE, Bluetooth Classic, Zigbee, and Thread

USB

USB-C for power and programming; USB-A with USB 2.0 High-Speed OTG

Storage and expansion

MicroSD slot with four-bit SDMMC and 20-pin GPIO header

Industrial interfaces

RS485 and CAN

Audio

ES8389 stereo codec, two amplifiers, and dual microphones

Software support

ESP-IDF, LVGL, and 18 example projects; Arduino support in development

Zigbee and Thread make it a solid device for DIY smart home kits since many lights, plugs, and sensors work better on those mesh protocols than on Wi-Fi. However, all the board’s wireless standards share one 2.4GHz radio. Espressif recommends using two chips with separate antennas for a more reliable Thread border router or Zigbee gateway.

Leave a Reply

Your email address will not be published. Required fields are marked *