17 - Nov - 2026

Don’t make the same mistakes I did when installing a smart lock

I need to get “slow and steady wins the race” tattooed on my forehead. I’m a bit of a rusher; I finish other people’s sentences too often, I boost through yellow lights before they turn red, and have a tendency to “streamline” my tech setups (translation: I plug stuff in too fast). Inevitably, this causes the kind of headaches that a few extra contemplative seconds could have prevented, and one of the best examples I have of that is my smart lock.

About said smart lock: mine is a retrofit design. That means I was able to use my existing deadbolt assembly with a new, battery-fueled lock. Retrofitting is supposed to make things easier, but not when you’re trying to craft your own shortcuts simultaneously. But if I hadn’t made the following four mistakes, you wouldn’t have been able to learn from them, right? That’s what I’ll be telling myself at any rate.

4

I used whatever AA batteries I had lying around

Cheap batteries meant shorter life and electrolyte leaks

A pair of Gigacell AA batteries showing Heavy Duty on the packaging Credit: Amir Bohlooli / MUO

The majority of smart locks are battery-powered; the cells supply the energy required to turn the motorized deadbolt and to operate your lock’s electrical features. Some locks use a rechargeable battery, but mine called for four AA batteries (which were included). Unfortunately, I lost them. Also, I opted to replace them with some cheap AA batteries I had lying in a junk drawer — bad idea. Within just a few weeks, I started receiving low battery notifications on my phone.

It got worse: When I went to change them out, I discovered that the batteries had started leaking. This typically happens when the battery internals start to degrade, allowing the electrolyte to pour out. Dealing with battery leakage is such a mess; I also knew on the day of my install that there were perfectly good AAs that I didn’t bother grabbing instead. Had I chosen those Energizer cells instead of the no-name brand, the lock would have lasted far longer (potentially up to one year, according to Yale Home).

3

I didn’t check my door’s alignment carefully enough

Temperature and humidity always win

It was winter when I first installed my smart lock; by the summer, it wasn’t locking correctly anymore. It turns out that door frames are surprisingly mobile throughout the year. As seasonal temperatures and humidity rise and fall, lumber has a tendency to warp and swell, which can throw off your door’s alignment. It can also affect the positioning of your strike plate — the metal plate that a lock deadbolt connects to. This is what was causing my deadbolt to fail to fully slide into the strike plate. It’s also what caused the deadbolt to start digging into the door frame (see the photo above with the red arrow).

Fortunately, many smart locks can be recalibrated to account for a slight change in your door’s alignment. I tried that with my own lock, but the framing had moved so much that I needed to manually adjust the strike plate with a screwdriver. Upon reflection, I wish I’d been more attentive during the initial install; it’s possible I could have detected some small alignment troubles before the regional climate exacerbated the issue.

2

I never bothered to disable Bluetooth

It gets in Wi-Fi’s way

SwitchBot Lock Pro and Keypad Touch on door
Jowi Morales / MakeUseOf
Credit: Jowi Morales / MakeUseOf

The smart lock I installed came with a Wi-Fi module that’s plugged into the same room as my router. When first setting up your lock, there’s a chance you’ll be required to onboard via Bluetooth, even if you’re configuring your lock to live on Wi-Fi. But you can usually go back into the lock app to disable Bluetooth once your setup is complete. I never did, because my lock can be controlled via Bluetooth or Wi-Fi. As it turns out, using both wireless standards proved detrimental in the long run.

I’ve often encountered situations where my smart lock app doesn’t know whether to use Bluetooth or Wi-Fi. This always slows the software down, and the extra time it takes to settle on a wireless standard is battery hours I won’t get back (remember, my lock isn’t rechargeable).

Hindsight is 20/20, but I should have vetted my connection options more thoroughly; clearly, my assumption that two wireless connections were better than one didn’t pay off.

Aqara Smart Lock U400

Brand

Aqara

Connectivity

UWB, Bluetooth

Integrations

Home key in Apple Wallet, Aliro-enabled for Android

Compatible Locks

Standard US 60/70mm deadbolt

Battery

1-2x rechargeable Li-ion battery

Keypad

Yes

The Aqara Smart Lock U400 is one of the first smart locks to utilize UWB (ultra-wideband) radio and Bluetooth connections for a smarter, more secure solution that won’t accidentally unlock and is more resistant to rally attacks than most of its competition. The U400 works with Home Key in the Apple Wallet and is Aliro-ready for Android devices.


1

I forgot to set up guest access before leaving town

Too many spare keys

The Wyze lock from an angle, showing off the buttons and finger print reader Credit: Shaun Cichacki/MUO

One of the most convenient features of a smart lock is having the ability to assign guest access to friends and family. This is great if someone routinely pops in to check on your place while you’re traveling, or if you want to have access to your home in an emergency. I never bothered to set any of that up, only to find out on the first morning of a vacation that I also forgot to put out the spare key for my girlfriend’s dad. Whoops. Should have thought twice before flying all the way across the country!

While I was still able to remotely open the door for him, it would have been much easier to have set up the lock app on his phone with guest access; he would have been able to let himself in and out without waiting for me to unlock the door. Guest access for devices like smart locks is usually customizable, too, allowing you to extend and revoke permission as you see fit. Some smart locks even let you generate temporary codes that guests can input, which often expire automatically.

Don’t just install for today

One of the best parts of installing smart home devices is how quickly you can get everything up and running. Ecosystem software like the Alexa app and Google Home can expedite the process even more, but as I learned the hard way, rushing through your device’s initial setup may impede you and yours later on; and often when you have the least amount of troubleshooting time to spare.

Leave a Reply

Your email address will not be published. Required fields are marked *