17 - Nov - 2026

Bambu got greedy, so I finally gave its biggest 3D printer rival a shot

Bambu Lab has made 3D printers feel like iPhones, to the point where they’re boring in the best way possible. Its printers are fast and dependable enough that I can spend more time making things and less time tuning them. But great hardware only goes so far when the company behind it goes against everything the 3D printing community has stood for over decades.

This frustration pushed me to bring my A1 Mini offline into a LAN-only environment, but that wasn’t enough. Then, the Elegoo Centauri Carbon 2 Combo showed up on my doorstep and quickly made me realize Bambu isn’t the only brand making excellent printers.

Bambu keeps raising the garden wall

LAN mode offers an alternative, but comes with compromises

My problem with Bambu isn’t about a single isolated firmware update. It was the direction Bambu Lab chose. Its authorization-controlled firmware requires approval for critical operations including starting prints, adjusting temperatures, starting remote video, and controlling AMS settings. Bambu positioned Bambu Connect as the bridge for third-party software. The Developer Mode in Bambu Connect is supposed to restore more direct access only in LAN mode and disconnects the printer from Bambu Cloud.

Bambu claims these changes are to improve security, and security on a network-connected machine with heaters and moving parts is a significant concern. Then again, isn’t that the same argument that HP made for its cartridge DRM?

Regardless, the practical result is still far more friction and greater dependency on Bambu’s software stack. Owners can stay on older firmware, route third-party workflows through Bambu Connect, or abandon cloud features entirely in the provided developer mode. None of these options are as straightforward as just using the printer you bought without thinking twice.

Elegoo promised everything we loved about Bambu

Minus the restrictions

Elegoo CC2 kept on a desk.
Photo by Yadullah Abidi | No Attribution Required.

On paper, Elegoo’s Centauri Carbon 2 Combo lands squarely in Bambu territory. It is an enclosed CoreXY machine with a 256 x 256 x 256 mm build volume, a claimed top speed of 500 mm/s, a 350-degree-Celsius hot end, automatic calibration, and the four-color CANVAS filament system. It supports LAN, Wi-Fi, and USB printing, and basic printing doesn’t require cloud access. It seemed like the perfect upgrade after my A1 Mini.

What I really wanted to know was whether Elegoo could deliver the appliance-like experience that made Bambu printers so appealing. I did not want another machine that turned every print into a troubleshooting session either. I simply wanted a printer that got out of my way without taking control for me.

ELEGOO Centauri Carbon 2 product image

Build Volume

256 × 256 × 256 mm

Printing Speed

≤500 mm/s

Max Bed Temp

110°C

Nozzle

Brass-Hardened Steel

The new ELEGOO Centauri Carbon 2 offers full auto-calibration, automatic spool refills, and tangle prevention. Instead of worrying about errors, you can focus on printing and creating.
 


Finally, I’d found my perfect 3D printer

The first week was glorious

For the most part, the CC2 delivered an experience on par with, and sometimes even better than, Bambu. When the machine behaved, prints completed cleanly and predictably. The motion system felt quick, the enclosure broadened my material options, and CANVAS made multicolor prints much easier than the manual filament swaps I had been doing so far.

The printer also has some nice-to-haves, like self-rewinding filament spools that attach to the right side of the body and feed straight into the CANVAS module. This saves an enormous amount of space as you don’t have to worry about a separate piece of equipment like the AMS Lite. The touch screen and the actual interface are a joy to work with. The built-in camera is decent enough for timelapse videos and runs at a high enough framerate that doesn’t resemble a slideshow.

Elegoo Slicer device page.
Screenshot by Yadullah Abidi | No Attribution Required.

My first week with the Elegoo CC2 was nothing short of ecstatic. I could send a job and focus on the project instead of hovering over the first several layers, waiting for trouble. It delivered everything I liked about Bambu, without taking away any control or installing any restrictive firmware.

Unfortunately, that behavior did not last very long.

Then one error code made me miss my Bambu

A dead camera and a faulty CANVAS module

Elegoo CC2 extruder through enclosure.
Photo by Yadullah Abidi | No Attribution Required.

My particular CC2 worked great when it did, but otherwise, it was plagued by error code 1243. Elegoo defines it as a “toolhead extrusion failure” and recommends checking for an incorrect hot end, an enabled Filament Ramming setting, tangled filament, poor extruder-gear engagement, or a clogged nozzle. My week-old CC2 did not have any of these problems, and to make matters worse, the issue seemed most common with Elegoo filament.

The printer could be producing an otherwise flawless part, then suddenly stop. A fast, automated printer loses much of its value if I cannot trust it to finish unattended. On long jobs, every hour felt like another chance for the error to return. It didn’t care about filament colors or brands, and even a direct MQTT feed from the printer couldn’t exactly tell me where the problem was.

The built-in camera also failed within a month of the first print. Camera monitoring and timelapse capture are advertised features, not luxuries in this class. Losing the camera didn’t stop the printer from functioning, but it removed my main way to check prints remotely and compounded my doubts about the machine’s dependability.

Spare parts sent from Elegoo.
Photo by Yadullah Abidi | No Attribution Required.

To Elegoo’s credit, they did proactively help me resolve this issue, and ended up sending a bunch of spare parts to try and fix the problem, including the camera module. In the end, a full CANVAS module swap ended up fixing the problem.

I haven’t seen the error come back, but since I don’t even know what caused the problem in the first place, I am a little scared it might pop up again. That doesn’t sound very reliable.

For comparison, my Bambu Lab A1 Mini has been running for seven months without any maintenance whatsoever. I just load it up with filament, send over my files, and the printer does the rest. The only print failures I’ve had on the A1 Mini were due to bed adhesion issues caused by a dirty build plate. In its 300+ hours of print time, the A1 Mini hasn’t botched a single print. The CC2, on the other hand, ran into error 1243 on the third print I tried on it.

I’ve researched the issue and while it’s well-documented, it doesn’t seem to be widespread, so it is possible that I ended up with a defective CANVAS module from the factory. Regardless, Elegoo told me that it isn’t a common issue either and did provide me all the parts I needed to get the printer back up and running again.

Unless you’re like me and have the time, tools, and technical knowledge to chase down issues like this, the experience would leave an otherwise great printer useless.

The CC2 is a strong alternative to Bambu, with some qualifications

Support saved it, but quality control still has homework

The CC2 did not provide a flawless review period. A persistent error, failed camera, and major module replacement are serious problems for a machine sold around convenience. Buyers should not need replacement parts to reach the promised experience. And while I don’t expect you’ll run into the same problems I did, there are enough complaints of this error on the internet for me to point this out.

The Elegoo printer did just enough right to keep me from switching back to Bambu.

In the end, the Elegoo printer did just enough right to keep me from switching back to Bambu. The CC2 itself is a printer that works beautifully, delivers fast enclosed CoreXY performance, and handles four-color jobs beautifully. Elegoo’s quality control gave me reasons to hesitate, but its support gave me reasons to stay.

I love my A1 Mini, and it still sits right beside the CC2 handling smaller, PLA print jobs. But the problem with Bambu is that excellent hardware should not become leverage for normalizing restrictions after purchase. Elegoo’s alternative was a little rough around the edges, but once I got it working, it delivered exactly what I wanted: a capable printer that works for me, rather than an ecosystem that expects me to work around it.

Leave a Reply

Your email address will not be published. Required fields are marked *