18 - Nov - 2026

Plugging in an Ethernet cable won’t save you from Windows’ power-saving habits

Switching to Ethernet is supposed to be the fix-all for flaky internet. It almost feels like one thing Windows can’t mess with. Well, I’ve got news for you: that’s sadly not the case.

Windows has a few settings that throttle your wired connection, and yes, they’re all enabled by default. Unless you take the time to disable them, your Ethernet connection is going to feel lackluster, no matter how good your router or ISP actually is.

Windows can throttle your Ethernet adapter to save power

Meet EEE, Green Ethernet, and Power Saving Mode

Person plugging in the Cable Matters ethernet cable into a router
Hannah Stryker / MakeUseOf
Credit: Hannah Stryker / MakeUseOf

The general expectation when using an Ethernet connection is that you’ll get a rock-solid, full-speed internet. That’s true for the most part, but Windows has a few settings that can mess with it. The culprit in this case is a trio of power-saving features that are enabled out of the box and can tank your throughput.

First up is Energy Efficient Ethernet, or EEE. It’s actually an IEEE standard, and the idea behind it is reasonable enough. It basically allows your network adapter to drop into a low-power state when there’s low data activity. Later, when there’s more traffic, the network adapter goes back to full speed. It’s great when it works, but there are times when it doesn’t do that. That switch back to full-speed mode is sometimes delayed. This obviously doesn’t happen all the time, but when it does, good luck figuring out EEE is the reason.

The second is Green Ethernet, which is a vendor-specific flavor of EEE. Realtek, for instance, loves bundling this into its driver. This feature works by scaling down the cable’s power output and signal strength when your adapter detects an idle state or a short cable run. Again, it’s a noble idea, but it can end up slowing down your connection at times, even when you’re not actually idle.

Lastly, there’s Power Saving Mode, which is the broadest of the three. It’s part of Windows’ general power plan, and it can turn off the adapter entirely or clock it down at times to save a few watts, the same way it dims your display or spins down a hard drive.

The worst part here is that the actual energy saved by any of this is basically a rounding error. We’re talking about fractions of a watt. To be fair, these standards make a lot of sense at scale, like at large offices or data centers, which is why they exist. The other reason is compliance. Manufacturers are required to meet certain green energy efficiency standards to sell hardware in various markets, so features like these are enabled by default. But yes, if you’re using an Ethernet connection at home and chasing full gigabit speeds, disabling these modes makes sense.

Disabling these Ethernet power-saving settings is a no-brainer

Time to unlock the speeds you paid for

All these Ethernet power-saving settings live inside Device Manager, so you can disable them all from one place.

  1. Right-click the Start button and choose Device Manager.
  2. Expand Network adapter, find your Ethernet adapter, and double-click it to open its properties.
  3. Head to the Advanced tab.
  4. Look for Energy Efficient Ethernet and set it to Disabled. Do the same for Green Ethernet and Power Saving Mode.
  5. Click OK.

Some Ethernet adapters bundle all three under a single entry, so don’t be surprised if you only see one or two options instead of three separate ones. Simply disable whatever shows up, and you’re covered.

While you’re there, it’s also worth heading to the Power Management tab and unchecking Allow the computer to turn off this device to save power. This one kicks in less often than the other three, but it’s just as capable of causing random disconnects, especially overnight or during idle stretches. And since the power savings from any of this are negligible on a personal computer anyway, there’s really no downside to turning it off too.

There are a couple of more Ethernet settings that can help

There’s always room for improvement

Device Manager showing Interrupt Moderation
Screenshot by Pankil Shah — No attribution required

Besides all the power-saving settings, your Ethernet adapter has a couple more options worth looking at. The first one is Interrupt Moderation. It batches up network interrupts instead of firing one off for every single packet that arrives. The idea is to reduce CPU load by processing data in small bursts rather than constantly. This can cause latency issues while gaming, which isn’t worth it for most people.

Flow Control is a mechanism that lets your adapter and the router tell each other to pause data transmission when one side is getting overwhelmed. It’s meant to prevent packet loss during congestion, but it can backfire, especially when a router or switch doesn’t handle these pause frames gracefully. You end up with stuttering transfers instead of a smoother connection.

Both settings are in the same place as before. Head to the Advanced tab inside your network adapter properties and disable them both.

Leave a Reply

Your email address will not be published. Required fields are marked *