After setting up Bitwarden a few years ago, I’ve barely bothered to change any settings because it just works. Having tried several password managers, I decided to revisit Bitwarden to see if I was leaving any real security improvements unused.
I found a few. Some settings were handing out more access than I’d realized, and a few were located on menus I’d never opened. It took a few minutes, but configuring these settings closed a few small gaps in how I was using Bitwarden.
Protect your most important logins twice
Master password re-prompt adds a second check to individual items
Your vault has a master password, which is great security. While it’s unlocked, someone at your computer could access the data inside.
From my Bitwarden browser extension, I configured Master password re-prompt to fence off individual items. This way, Bitwarden requires the master password again before it shows or autofills these items.
Follow these steps to configure it:
- Open the extension and find the item you want to secure.
- Click the More icon (three vertical dots) and select Edit.
- Scroll down, select the Master password re-prompt checkbox, then Save.
I now have this setting on for my primary email and my bank. This feature has limits, though. According to Bitwarden, it’s an interface guardrail, not encryption. Hence, if someone has deeper access to your device, it doesn’t stop them.
If you don’t unlock your vault with a master password, this feature isn’t available. This can happen with some SSO configurations.
Your 2FA codes are hitting the clipboard
Bitwarden copies them after autofill unless you switch it off
I used to have my authenticator codes in Bitwarden, but I never realized the extension could copy my current TOTP code to the clipboard when it autofilled a login. This is a Bitwarden default.
You may find the toggle responsible for this under Settings > Autofill. It’s called Copy TOTP automatically.
This isn’t necessarily a flaw, but it does increase exposure; disabling it reduces that risk. TOTP codes expire quickly, so the exposure window is limited. But anything else with clipboard access may still be able to read the code while it’s valid.
Just below this setting on the Autofill page is a Clear clipboard option. The current default is five minutes, but it’s worth checking this setting if you’ve carried your Bitwarden configuration across different versions.
When Copy TOTP automatically is disabled, you lose the convenience of having the code ready to paste immediately after autofilling a login. You will have to use the inline menu or copy the code yourself.
Check whether you enabled page-load autofill
It’s off by default, but Bitwarden warns that compromised sites can exploit it
Bitwarden can fill in your credentials automatically when a matching page opens. This happens without you clicking if Autofill on page load is enabled.
This setting is disabled out of the box, and a warning next to it notes that compromised or untrusted websites can exploit it. However, it’s convenient, and if you’ve used Bitwarden for years, you may have enabled it at some point. Hence, this specific tip is more of an audit than a fix.
To check:
- Navigate to Settings > Autofill on your extension.
- Scroll down and uncheck the Autofill on page load box.
Bitwarden already blocks page-load autofill in untrusted iframes, but I still prefer to trigger autofill myself using Ctrl + Shift + L.
Make logins show up in fewer places
Host matching ties a login to one hostname instead of the whole domain
By default, Bitwarden matches logins by base domain. This is a convenient feature, yet it is broader than you may imagine. This means that a login saved for example.com can also be offered on its subdomains (e.g., sub.example.com).
I prefer Host matching. Host matching restricts autofill to the specified hostname.
To configure it:
- Navigate to Settings > Autofill on your extension.
- Scroll down to Default URI match detection and set it to Host.
You may also set it to Exact. This way, you can restrict autofill to HTTPS pages because the URL has to match exactly.
While this setting doesn’t control whether a site deserves your trust, you at least manage where a login gets offered.
Tell Bitwarden where to stay out
Blocked domains stops fills, passkey prompts, and save prompts
You have the Blocked domains option at the bottom of Settings > Autofill, and it does more than the name implies. Once you add sites to blocked domains, Bitwarden stops offering passkey prompts and autofill. It also stops asking to save or update logins.
There are already options for URI matching and excluded domains, but blocked domains does something different:
|
Setting |
What it controls |
What still happens |
|---|---|---|
|
URI matching |
Where a saved login is offered |
Other Bitwarden prompts and features can still appear |
|
Blocked domains |
Autofill and credential prompts |
Bitwarden can still be used manually in the extension |
|
Excluded domains |
Save/update and passkey prompts |
Autofill can still work |
Make an offline attack more expensive
Argon2id sits in the web app’s encryption settings, not the extension
Bitwarden runs your master password through a key derivation function, or KDF, instead of using it directly. This makes individual password guesses slow and expensive. That cost is often what prevents an attacker who obtains your vault from quickly accessing your data.
Bitwarden supports PBKDF2 and Argon2id. Both make password guessing more expensive, but Argon2id also requires memory for each derivation. That makes large-scale parallel guessing more costly.
You can update this in the web app by going to Settings > Security > Keys and changing from the default to Argon2id.
The defaults you get with Argon2id are 32 MiB of memory, 6 iterations, and a parallelism value of 4. You don’t have to max out these options, because higher values will make the unlocking process on your devices slower.
However, the default PBKDF2 is still the better option for FIPS 140-2 compliance, and changing the KDF settings doesn’t remove the need for a strong master password.
Your vault deserves one proper look
I have included six security configurations, but you don’t have to do all six. I prioritize the re-prompt on my email login and the Argon2id switch. These are changes I can make once and then leave alone unless my needs or devices change.
The other changes depend on how you browse. Bitwarden’s defaults are sensible for broad use, but they don’t necessarily match how I want my vault to behave. Taking time to look through these settings made me understand what my vault actually does when I’m not paying attention.
- OS
-
Cross-platform
- Developer
-
Bitwarden
- Price model
-
Free, Premium available
- Services
-
Password manager, password generator, secure file sending, credential management, etc.
Bitwarden is a secure, open-source password manager that helps you generate, store, and autofill strong passwords across all your devices. It uses end-to-end encryption, meaning only you can access your data—not even Bitwarden itself. With support for passkeys, secure notes, and cross-platform apps, it’s a privacy-focused alternative to built-in browser password managers.