Building a home server is easy, and often a lot less expensive than you’d think. If you’ve been building PCs for a while, you’re bound to end up with spare parts sooner or later, be it some extra RAM or a spare, if not partially functional, motherboard, along with the right OS to go with it.
Many of these parts can be cobbled up together to be made into home servers, and the cost involved is significantly lower, especially if you buy extra components used. I made one such DIY home server a while back, and so I’m here to tell you how it’s done and what to look out for.
Pick a motherboard and CPU before you start
This will determine future upgrades and hardware
The first thing you should settle on is a CPU. Depending on what you pick, this might change your motherboard platform of choice entirely. Any type of CPU will do, really. Of course, the usual restrictions still apply — most notably, the older the CPU, the more power-hungry it will be. Which in turn raises your electricity bill.
Once you settle on a CPU, you should move on to the motherboard next. For my AM4-based home server, I used an existing Ryzen 3400G and a B550M mATX motherboard, but looking back at it, there are some things I should have taken into account.
The mATX board severely restricts the number of expansion slots you have usable, and this can be fatal. I ran out of slots quickly, and needed another x16 slot for a second GPU.
You’ll also want the right kind of motherboard. Not all motherboards are created equal, and some have more features than others. In general, look for a motherboard with enough expansion slots that support PCIe bifurcation. This will let you drive multiple cards and GPUs a lot more reliably.
If you’re on AM4 like I am, an X570 board will be your best (if not expensive) pick. X570 boards also maintain full PCIe 4.0 support across the entire board, including connections wired to the chipset, unlike the B550, which tragically limits the chipset lanes to PCIe 3.0 speeds.
This gives you a ton of leeway and not having to worry about PCIe bandwidth bottlenecks all that much.
What you can and should not buy used
Quite a lot of components can be bought used
Used PC parts are kind of a double-edged sword. On one hand, they’re far more accessible (more so especially given the current crisis), but they can be a bit of a minefield to walk into.
There’s every chance that the seller had a faulty unit they wanted to get rid of for cheap. Which is why you should never buy some components secondhand.
PSUs, for example. These components have a high risk of failure due to age. An older PSU might decay over time, taking the rest of the PC with it when it dies.
Storage is a bit of a grey area. While it’s generally never recommended to buy storage secondhand, we live in precarious times. A terabyte of storage can set you back by a hefty amount these days, and is something I’d consider as the bare minimum.
The best way to handle it then is to look out for warning signs. Run stress tests on the device, and make sure the seller has an assurance policy. This applies to HDDs as well.
You can buy everything else used, but as always, check the components yourself and look for seller reviews or other red flags.
Each home server is unique, with different hardware requirements
The kind of grunt you need for your home server will depend on what you intend to do with it. If you’re looking to just run it as a media server or a backup server of sorts, you don’t need to go too crazy on processing grunt. A barebones build will do just fine, with a baseline of 16 GB RAM and a capable GPU (or iGPU). I recommend going with Intel iGPUs if you do, since those have better hardware decoding along with other niceties like SR-IOV.
In this case, you should invest in more storage. Use a fast NVMe drive as your boot drive. Any capacity is fine — even a base 128 GB drive will do. Finally, you’ll want to grab a couple of high-capacity HDDs to store and maintain all your data.
If you’re looking to do things like run virtual machines in Proxmox, you will need a lot more processing power. You’ll want to invest in extra RAM, a decent enough multi-core CPU, and one (or more) GPUs for best results.
This is all optional, of course, and you could always do things like run containers instead. Either way, you’ll still need to invest smartly. Since a home server is essentially a plain PC, you can always purchase these parts later.