18 - Nov - 2026

My best homelab upgrade this year wasn’t hardware at all

Homelabs are quite the rabbit hole to delve into. There’s a ton of things to explore and customize, making the home lab truly your own. One of the more unconventional “upgrades” I’ve made this year is switching to an open-air PC case, and it’s been quite the pleasant surprise.

The open-air PC case in question

Calling it a case is a bit of a stretch

Open air PC case Credit: Dipan Saha/MakeUseOf

While it houses pretty much any PC component you can think of, calling an open-air test bench a PC case is a bit of a stretch. After all, it’s just two sheets of folded metal screwed together. That said, the ALAMENGDA DIY PC Test Bench is surprisingly well-built and seems to be cast entirely in iron. The box also came with a cute little single power switch, a set of screws to assemble everything, and a set of side plates.

You can find clones of these cases online at varying prices. Get whatever is cheapest and has reasonable shipping — they’re all roughly the same.

I’d have preferred a proper power/reset switch setup, but at around $30, I can’t really complain. Besides, it also leaves room for upgrades, as you’ll see later. Still, assembling the case was a nightmare and not a well-documented one, so here’s my walkthrough for the record.

Assembling the case and the rest of the PC

Unclear instructions, which present some hurdles

The ALAMENGDA DIY PC Test Bench case did come with a printed sheet of instructions, but the documentation was sparse at best. Trust me, I’ve tried. I went through a bunch of YouTube tutorials and the manual itself to come to the impossible conclusion: the plates must be facing at opposite ends.

It makes no sense and defies all logic, and I spent a good hour or two scratching my head while I tried to assemble the case in all ways but the right one. Once that was sorted, it was time to place the PC parts on the case.

I used a leftover B550-M MSI motherboard (the MSI B550M-P mATX) from my previous build as the base to start upon. An ATX-sized board would be much better, though, since you’d have way more expansion slots.

As for the CPU, it was the trusty Ryzen 5 5600G, now replaced by a Ryzen 5 5600X on my main gaming PC. It came with 32GB DDR4 RAM, unfortunately not in dual-channel mode (8+8+16), and a 512GB NVMe drive for both boot and storage.

I then paired this with a leftover Gigabyte 550W non-modular PSU and the RTX A2000 6GB GPU for some GPU acceleration. Assembling and wiring everything together was the easiest part of the whole process, and all that remained was to attach the power switch.

The stock, bundled power switch is kind of useless, so I opted for an aftermarket option. This particular switch is kind of overkill, having physical buttons, lit for both power and reset. It also has 3.5 mm audio in and out, along with two USB-A ports.

Once connected, it was time to turn on the PSU and test things out. To no one’s surprise, the PC started normally, as if nothing had ever changed.

Why I picked an open-air PC case in the first place

Easy swapping of components

Applying thermal paste Credit: Dipan Saha/MakeUseOf

Onto the obvious reason why you’d want an open-air PC case in the first place: easy access. Disassembling a PC case every time you want to test out a new hardware configuration (or just debugging issues in general) gets frustrating really quickly.

A test bench solves this entirely and lets you swap out and monitor components to your heart’s content. As for how it’s held up, I’d say pretty well. It also has the added benefit of lower temperatures, since there’s nothing to restrict airflow here.

There are some big disadvantages here too

That said, an open-air PC case can quickly become a nightmare, depending on where you live. It’s particularly dusty over here, and I have to clean the case regularly. A small blower and a brush help, though I wish I didn’t have to do it so often.

Open-air cases have no shielding, so it’s wise to keep them in places with little movement. Make sure to tighten the hinges so they hold things better too.

Assuming you can live with these (very minor) compromises, it’s a pretty solid buy and one I can wholeheartedly recommend.

Leave a Reply

Your email address will not be published. Required fields are marked *